Rectangular Covers (click on image to enlarge)

 
 
Standard AMi Rectangular Beam & Infill cover with reinforced access area to mixer hatch opening Standard AMi Rectangular reinforced cover with integrated raised hatches all panels are fitted with lifting points for removal by crane Special Rectangular raised cover with louver vents in vertical walls a standard 1000mm x1000mm hatch and lifting points for removal. Adjacent is a reinforced cover with penetrations for process pipes Standard AMi Rectangular one way spanning cover 13.6m clear span, a cowled adjustable vent can be just seen. In the foreground a beam and infill cover has been supplied for access and sampling openings at the lower level Standard AMi Rectangular reinforced cover with flush 800mm x 500mm hatchs a 200mm n.b. spigot can be seen fitted along with numerous penetrations for penstock handles and process pipework. The covers are fitted with lifting points for individual removal by crane

The Rectangular one way spanning Cover is of a simple robust construction to AMI Designs standard design and suitable for rectangular tanks of unlimited length and widths up to 16m clear span.  The cover consists of individual glass reinforced plastic (GRP) rectangular segments, which span the tank and are fixed down to the tank walls; the individual segments interlocked with each other, each segment covering approximately 2.5m of tank.  Segments are profiled to ensure rainwater run-off.
The Cover will be supplied with all necessary fixings and seals, fixings will be Stainless steel or GMS where fixing is onto existing GMS structures
The Rectangular one way spanning Cover can be fitted with the full range of access hatches and ancillary equipment and can be designed to accommodate existing pipe work Typical standard design load capacity 0.75kN/m2

The Beam and Infill Cover is a simple arrangement of GRP Sheets that are strong and rigid by way of their rib shaped profile and are supported by more substantial Hollow GRP Box beams typically spaced 2.0 to 3.0m apart. The cover is designed to sit directly on top of the tank walls and provides a low finished profile. Joints are sealed with strips of EPDM foam. The cover will be supplied with all necessary fixings, fixings will be Stainless steel or GMS where fixing is onto existing GMS structures The Beam and Infill Cover can be fitted with the full range of access hatches and ancillary equipment and can be designed to accommodate existing pipe work Typical standard design load capacity 0.75kN/m2
 

The Reinforced Cover  is a modular flat panel cover that is supported by galvanised steel or a GRP beam system or a suitable existing framework. Interlocking panels are available in various widths and various lengths and can be finished with a slip resistant surface.
This cover is particularly suitable for  areas that require regular  pedestrian access or where a greater loading capacity is required such as channels and walkway areas. Hand railing, where necessary, can be incorporated into the design.
The design of the cover allows various sizes of access hatches and pipe work requirements to be incorporated. Typical standard design load capacity 1.5 to 5.0kN/m2